Tootfinder

pick up a rock
clean a rock
move a rock
place a rock
pick up a rock
clean a rock
move a rock
place a rock
#poolpond #diy #backyardProject #watergarden #pond #pondlife

2/2 Then it was time to decide exactly how to create the manifold to direct the return water back into the pond or into the filter. I decided that I wanted the manifold to be well within the pond liner in case anything was leaking so I cut the black tube and extended the PVC to meet it into the main area of the pond.
One valve goes to the bottom return sprayers. One valve goes to what will be sprayers along the long edge of the pond. And the last valve allows water to go into the filter.
Note to self: at least one of these valves must be open at all times if I don't want to blow up the pump :-)
#poolpond #diy #backyardProject #watergarden #pond #pondlife

Now that we have had our brief bit of fun with the #poolpond, it’s time to drain it so work on completing it can continue! It took just over 12 hours for my little spare pond pump to empty the main pond of about 80% of its water.
It will be empty by morning. I will empty the filter and intake bay as well just to clean everything out. The movement of the past couple weeks through the system will have loosened up a bunch of the gunk still on the various rocks in the filter so a full pump out should remove all that.
I will then concentrate on finishing the piping in the bottom of the main pond for the intake for the second pond and the “periscope” for the bottom returns.
Then I can work on building the rock wall to line the inside of the pond. Or at least experimenting to see if it will work at all!
If it *does* work and I have enough rock to at least start on the bottom layers of the inside wall, then I’ll be able to achieve another milestone: placing the final pebble on the bottom. Important, because that will prevent any groundwater from infiltrating and causing the rubber liner to bubble out.
Really really want to get past that mark before the autumn rains come! For obvious reasons! ☔️
Other jobs that need to be done before winter:
- finish the manifold for the second pump to distribute water to the sprayers and filter and figure out how and where to house and conceal it.
- Dig the electrical trench from the house all the way around the long side of the pond to the back tool shed so we can start wiring it in.
- Clipping the wires on the pumps and adding extension wire to them so they can reach said electrical supplies.
- permanently shore up/modify the borders of the ponds where they were found to be low.
- make a few other minor terraforming modifications for the stream and some of the edges so the water goes a little more where I want it to and a little less where I don’t.
#poolpond #backyardProject #portalberni #ponds #watergarden