important! first tape (that i've seen) of gillian welch & dave rawlings doing "wharf rat," rawlings nominally singing lead (but with lotsa welch), recorded a few weeks ago in glasgow. https://drive.google.com/file/d/1ibZWx-riX-IKCX3alVhhgq-MG9SZ…
There are finally real USB3 (not Thunderbolt, not USB4 PCIe Tunneling) 10GbE NICs!
RTL8159 chipset-based, it uses the generic cdc_ncm driver on Linux.
Also seems to work on macOS and iOS.
TCP throughput between GPD Pocket 4 and MacBook Pro M1 seems a bit low at ~6.2 GBit/s, but that might also be due to the connected devices (both sides are using the same adapter).
I don't have another 10GBit/s device here right now, sorry.
Don't have a USB 3.2 Gen 2x2 de…
Just swapped the 0.4mm nozzle of my 3D-Printer for a 0.2mm Nozzle. The level of detail and smoothness is stunning. Printing dust covers for USB A and C ports
#3Dprint #3Dprinting #3Ddruck
heise | Amiga reparieren: Diskettenlaufwerk retten oder mit USB-Floppy-Emulator ersetzen
Defekte Disketten und Laufwerke plagen viele Amiga-Fans. Nach einer Reinigung oder mit einem USB-Floppy-Emulator erwachen alte Spiele zu neuem Leben.
"MTS:n (Maanpuolustustiedotuksen neuvottelukunta) mukaan vain 39 prosenttia suomalaisista arvioi Yhdysvaltojen olevan valmis puolustamaan Suomea ja muita Euroopan Nato-maita. Miehet ovat
naisia luottavaisempia, sillä puolet miehistä uskoo Yhdysvaltojen apuun.
Perussuomalaisten kokoomuksen kannattajat ja luottavat Yhdysvaltoihin lujemmin kuin muiden puolueiden kannattajat." HS 10.12.25
#turpo
@…
The upgrade is not yet available. The issues described in my previous comment are with 25.04.
I'm in no rush for the upgrade. Whilst waiting, I learnt how to work with 25.04 encrypted root-on-OpenZFS whilst booted from a 25.10 USB memory stick in live mode. Information wasn't too difficult to find. Some pleasant surprises :-)
RE: https://mastodon.social/@Viss/115515862164790322
Someone hook @… up :hecked:
Here's the other bike light I added for the (now-dark) rides home. I found an LED strip, I do not remember where i got it, but I think it was an under counter light I tore apart?
Anyway, I 3D printed a little enclosure for it, added some rubber o-rings, velcro strapped onto the downtube, and plugged into a USB power bank.
It's pretty damn bright! I can slide it up a few centimeters to plug in the ebike when it needs charging, and it's simple to remove.